valve seals?

[Huw Powell]

>It should only be about a 4 hour job for a good technician. 
> Price range will vary, but I think $250 for the seals and
> then labor should cover it.  Somebody feel free to correct the prices.

When I did the seals on my coupe (2.1 l, solid lifters though), parts
cost was about $20.  I adjusted the vlave lifters and pretended to check
the compression and leakdown at the same time, wasted about 8 hours on
the job.  Oil consumption went down about a third.  

remember that oil can get lost through the rings, too...

-- 
Huw Powell

http://www.humanspeakers.com/audi/

http://www.humanthoughts.org/