Radio Antenna

[John Parry]

Hi Larry,
 
I just finished solving the same problem you have (on my 89 100). The
antenna amplifier is installed on the drivers side c piller (above the
back seat). My problem was that the shop did not supply power to the
amplifier during the CD head install. You need to connect ignition power
to the two white wires connected together (to one terminal) on the RED
connector (I think it's an eight pin) to power the antenna amp. The same
connector has a 12v feed, you can just jumper. Hopefully your wiring is
the same as a 100. You also need to only use the rr antenna hookup.
Everything is clear as mud right?
 
Hopefully this helps. Contact me if you need clearer instructions!
 
JP
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://www.audifans.com/pipermail/quattro/attachments/20011025/301cba2d/attachment.htm