Central Door Lock Problem

[Alexander van Gerbig]

    I had this problem with the drivers door on my 90q right after I bought
it.  I popped the door panel off and ran diagnostics on the vacuum switch,
came up perfect.  Checked the wiring for continuity and that was fine.  Then
I plugged the master control box in the boot back in and all was well.
Seems like the plug had jostled loose or the master box needed to be reset.
I am not certain where your box is in the 200, but mine was in the trunk
next to the strut tower.  Try futzing with that first and if that doesn't
help get that door panel off and check the vacuum switch.  If that is good
check the wiring for continuity.

Good Luck!

Alexander van Gerbig -- '90 90q20v -- '88 80t (R.I.P)

Euro Parts Prices----------------------------
http://www.uvm.edu/~avangerb/Eurobits.html

The Audi  80 Pages---------
http://surf.to/the80pages.com

North Ferrisburg, VT 05473