Javad, RE: FORGE Bypass Valve URL

Avi Meron avim at pacbell.net
Mon Sep 10 10:17:38 EDT 2001


Hi Javad,
I looked at the web site you mentioned and it looks real good.............

A couple of questions:
Do you know if the valve has the same guts as the Audi unit?
Does it open and closes the same as the Audi unit?
Are the physical dimensions the same? I have very limited space.

At present time I am running the Audi improved unit with the brass insert,
has been working for the last year+.  Before switching I was running the
Audi unit "all plastic" and it used to fail at least once a
year...............

I have had a BPV for the last 5years +, couldn't be without.  The difference
it makes is so considerable that I don't understand how anybody can drive
without it.  Unless they are "superb" driver, personally I consider myself
average and below, so I need all the help I can get!  It is even more
important if you are running higher boost than stock (I am chipped to run
1.7Bar, above atmospheric pressure, 15-17PSI before the fuel cutoff shows
it's thing!)

Let me know,
TIA,
Avi
I assume we are talking about the 1.8 valve?
-----Original Message-----
From: quattro-admin at audifans.com [mailto:quattro-admin at audifans.com]On
Behalf Of JShadzi at aol.com
Sent: Sunday, September 09, 2001 1:25 PM
To: charlie at elektro.cmhnet.org
Cc: quattro at audifans.com
Subject: Re: FORGE Bypass Valve URL

I am running the larger 1.8t unit and have been very happy with it.
Javad

In a message dated 9/9/2001 9:25:48 AM Pacific Daylight Time,
charlie at elektro.cmhnet.org writes:

<<
 Here's a URL for the FORGE bypass valve I'm using:

   http://www.stratmosphere.com/forge_valves.htm

 Pick the 2.7tt model rather than the 1.8t version.  It's $139.
  >>




More information about the quattro mailing list