[A4] Borla Installation ??

[josh Wyte]

Well, since I *hate* exhaust work, I took my Borla
exhaust down to the local Meineke and gave them $75 to
install it.  Well worth it, IMHO.

Anyways, if you're dead set of doing it yourself, you
can get at the downpipe bolts from underneath with a
long extension and a wooble socket.  Lube them up good
and expect to break a few, so make sure you have
replacements.

-josh


--- Jamie Howton <jhowton at fotofab.com> wrote:
> I am going to try and install my new Borla on my
> 98.5 A4 1.8TQ Tip tomorrow.
> I have it up on jackstands now and I have no idea
> how I am going to
> remove the three bolts that connect the front
> flexpipe to the catalytic
> converter.  My Bentley says "To remove, unbolt floor
> crossmember (20Nm/15 ft
> lb)"  The problem is that I have no idea what the
> floor crossmember is,
> there is no diagram and when I search on it in
> Bentley, all I get is a link
> to the pages telling me to unbolt it.
> 
> Any BTDT info for me?  Anyone I can
> call, my local Audi dealer are all a**holes so I
> can't use them.
> 
> TIA
> 
> Jamie Howton
> 98.5 A4 1.8TQ Tip
> 
> 
> _______________________________________________
> A4 mailing list
> A4 at audifans.com
> http://www.audifans.com/mailman/listinfo/a4


=====
Josh Wyte 
Momentum Motorsports
508-833-3024 After 5 pm EST

__________________________________________________
Terrorist Attacks on U.S. - How can you help?
Donate cash, emergency relief information
http://dailynews.yahoo.com/fc/US/Emergency_Information/