Oil preasure?

[Darek Jarski]

Where is this oil pressure relief valve and what does it look like? Also, I
NOW know that I am using the wrong filter but could FRAM filter be causing
the low pressure? (I will use OE next time.)

Thanks
Darek


>From: Konstantin Bogach <konstantin.bogach at morganstanley.com>
>To: Phil Payne <quattro at isham-research.com>
>CC: darek_jarski at hotmail.com, quattro at audifans.com
>Subject: Re: Oil preasure?
>Date: Mon, 01 Apr 2002 14:49:00 -0500
>
>Did it. No change.
>
>Thanks.
>Konstantin Bogach.
>
>Phil Payne wrote:
>
> > > one of my 200 have exactly same oil pressure as you describe.
>Another
> > > 200 I own has  higher oil pressure.  I just rebuild the head on first
> > > one, piston rings had no looseness at all.   I wish I knew why there
>is
> > > a  difference.
> >
> > Try pulling out, degreasing and reassembling the oil pressure relief
>valve.  The filter also
> > has a certain effect on the measured pressure.
> >
> > --
> >   Phil Payne
> >   http://www.isham-research.com/quattro
> >   +44 7785 302 803
> >   +49 173 6242039
>




_________________________________________________________________
Send and receive Hotmail on your mobile device: http://mobile.msn.com