Tie Rod Issues

[Tim Leonard]

Sorry Eric. Misinformed advice. I assumed same as a 5000. Wrong.
Tim
----- Original Message -----
From: Tim Leonard <nard1 at voyager.net>
To: <audi90sq at yahoo.com>; quattro <quattro at audifans.com>; urq
<urq at audifans.com>
Sent: Monday, April 01, 2002 4:44 PM
Subject: Re: Tie Rod Issues


> Eric,
> Are the inner ends worn/rotten/otherwise bad? If not just replace the
outer
> ends @ approx $10-20 each.
> Tim
> ----- Original Message -----
> From: <audi90sq at yahoo.com>
> To: quattro <quattro at audifans.com>; urq <urq at audifans.com>
> Sent: Monday, April 01, 2002 2:57 PM
> Subject: Tie Rod Issues
>
>
> > In my never ending quest to remove the clunk and play
> > from my 83' UrQ's steering, I think I am down to the
> > tie rods. I already did the steering rack, ball-joints
> > and strut bearings.  Is there any alternative to
> > forking out the $300 Blau wants for two new tie rods?
> > Anybody mange to fix/re-condition theirs?  I am not
> > that excited about that cost.  Any thoughts?  Thanks
> >
> > Eric Harten
> >
> >
> >
> > =====
> > Eric Harten
> >
> > 83' UrQ
> > 95' 90SQ
> > 01' A4Q
> >
> > __________________________________________________
> > Do You Yahoo!?
> > Yahoo! Greetings - send holiday greetings for Easter, Passover
> > http://greetings.yahoo.com/
> >
>
>