Question about injectors on EFI'd 10 valve cars

[JShadzi at aol.com]

--
[ Picked text/plain from multipart/alternative ]
Depends what system you are using, realistically you can have a good idle up
to about 400cc or 38lbs or so, after that idle speed needs to raise a little
to get a good idle. I'm using 50lb injectors, almost 520cc or so, the car
idles wells at about 1k to 1100 rpm, any lower gets a little lumpy.  Stock 3B
injectors are about 300cc, RS2 are about 15% bigger I think.

Javad


>
> > How high can I go and expect a decent idle?  What flow
> > rate is a stock 20v injector??
>
>