sloppy shifter 90 200tq

[james accordino]

Hi Ron,

It's a shaft with a flat on one side.  There's a pinch
bolt throught the base of the lever.  10mm, I believe.
 Loosen that bolt up and the lever will slip off.  It
can only be reinstalled correctly one way.  The
plastic insert will be easy to replace on the bench.

Jim Accordino
"toughest part is getting the ball out in place"

--- Ron Wainwright <ron_01056 at yahoo.com> wrote:
>   Listers,
>
>   I posted a problem a little while back about my
> shifter having allot of play or movement
> in neutral and in gear a few listers posted that
> maybe
> the sheer bolt that attatch's the selector shaft
> lever
> to the tranny was loose but isn't
>  I did notice allot of movement in the top of the
> lever where there is what's described as a ball
> socket
> and washer
> the lever is pinched in 3 spots to hold in the ball
> socket and washer but for the life of me I can't get
> the lever to move I can get the adjustment rod off
> but
> can't get the lever to move so I can replace the
> ball
> socket
>   can any lister give some advise on how to get it
> off
>  I'm scared to put to much pressure and break
> something there's really no room in there to get
> something in there to un crimp the 3 spots on the
> lever so I tried to pry it off but it didn't want to
> move so I stopped I'll have to make an appointment
> if
> no one gives me any BTDT or something close (that is
> me begging)
> Thanks
> Ron
> 90 200tqa 203k IA stage1,1.7 bar trying to hook up
> the
> power
>
>
> __________________________________________________
> Do You Yahoo!?
> Yahoo! Tax Center - online filing with TurboTax
> http://taxes.yahoo.com/


__________________________________________________
Do You Yahoo!?
Yahoo! Tax Center - online filing with TurboTax
http://taxes.yahoo.com/