Front Oil Seal Replacement

[Huw Powell]

> I'm getting ready to do the timing belt on my 98 A4
> 1.8Tq.

> What's the best way to tap the new seals back into the
> block (short of getting the special tool :-)

[entire quoted digest snipped]

a short piece of PVC pipe can work well if the seal is an appropriate
diameter.  tap the PVC lightly, using a small bit of wood to spread the
pressure over the entire circle.

--
Huw Powell

http://www.humanspeakers.com/

http://www.humanthoughts.org/