Source for exhaust manifold studs

[John Larson]

Given the propensity of these studs to break, rust is something I'd put up
with.  A little anti-seize on installation should cover this.  John
----- Original Message -----
From: "Jim Green" <jeg1976 at yahoo.com>
To: "John Larson" <j.d.larson at verizon.net>; <quattro at audifans.com>
Sent: Monday, August 05, 2002 11:15 AM
Subject: Re: Source for exhaust manifold studs


>
> --- John Larson <j.d.larson at verizon.net> wrote:
> > > > I'm running the Stainless Autotech studs.  I
> > > really
> > > > like them so far.
> >
> > Stainless is FAR more apt to break off then the
> > conventional steel material.
> > It tends to be more brittle.  The list has been
> > through this before.  John
>
>
> Well aware of that, I did it strictly for rust
> protection, which should make them easier to get out.
> Haven't had to touch them yet.
>
> =====
> Jim Green
> '89 90tq 034EFI, Haltech IG5
> http://www.geocities.com/jeg1976/car_home.html
>
> __________________________________________________
> Do You Yahoo!?
> Yahoo! Health - Feel better, live better
> http://health.yahoo.com
>