cold control pressure/temp ranges needed
Michael Benno
mbenno at yahoo.com
Fri Dec 13 13:31:30 EST 2002
--
[ Picked text/plain from multipart/alternative ]
Hello everyone
Does anyone know the control cold control pressure/temperature ranges for t=
he control pressure regulator in a Urq (PN 035 133 403 D). I know the speci=
fied range @ 68 degrees F, but I am doing my tests down at 30 degrees. I th=
ink these ranges might be specified in a 5000t (KH) Bentley. If anyne could=
check.
I am chasing down poor initial cold running which includes poor idle and ba=
ckfires in the intake manifold. I started with a fuel pressure test The amb=
ient temperature was 38 degrees F. The car had been sitting for about a wee=
k=2E Here are my test results:
1=2E Cold System Pressure: 84PSI (The specification is 75-85PSI so I am in =
spec.)
2=2E Cold Control Pressure: 18 PSI (I don't have the specification at this =
temperature but I think I am about 7 PSI too high based on some extrapolati=
on. This is why I need that temp/pressure chart).
3=2E System Pressure Leak down: 40PSI @ 0min, 38 10min, 38PSI @ 20min, 35PS=
I @ 1HR (This seems good but I am not sure what spec is here)
4=2E Warm Control Pressure (have not checked)
Based on this I think I need to adjust my control pressure down, but I need=
to figure out what is spec at the respective temperature ranges. I think t=
he only way to adjust the cold control pressure (or base control pressure) =
is to take the regulator abpart and tap on that pin. Does anyone have other=
suggestions on how to adjust Cold Control Pressure?
Mike Benno
84Urq
90q20v
S4Avant
---------------------------------
Do you Yahoo!?
Yahoo! Mail Plus - Powerful. Affordable. Sign up now
More information about the quattro
mailing list