How do I crank over my 1993 S4 without starting it?

[Brett Dikeman]

At 10:30 PM -0500 12/16/02, Kenny Bazzett wrote:
>Yep thats my question lets keep it simple.

Disconnect the ignition power stage unit or remove the fuse for the
fuel injectors(heck, you can pull the ECU fuse too.  Then the car
REALLY won't start :-)  Pulling the fuse for the injectors is
probably best, but expect fault codes.

Can't pull the FPR- the engine would still run for around a second.

If you mean -turn- it over, then you need to put a socket on the
crank bolt and turn it over that way, but it's a -big- bolt.  Don't
worry about breaking it loose- torque spec is somewhere around 350
ft. lb, breaking torque is probably much higher.

Brett
--
----
"They that give up essential liberty to obtain temporary
safety deserve neither liberty nor safety." - Ben Franklin
http://www.users.cloud9.net/~brett/
http://www.apple.com/switch/