Eurospec's stroker kit pricing
william r gerwig
pavwdoc at hotmail.com
Tue Dec 24 20:57:52 EST 2002
But a Eurovan motor is not an Audi motor! Not a ring cast on any part of it!
Also why would the tuners comment & a different part # for diesel except
maybe the 2.5tdi has a different bore x stroke?
Bill
>From: JShadzi at aol.com
>To: pavwdoc at hotmail.com, auditude at cox.net,
>quattro at audifans.com,audi20V_Kruemmer at yahoogroups.com
>Subject: Re: Eurospec's stroker kit pricing
>Date: Tue, 24 Dec 2002 20:46:34 -0500
>
>Bill, with all due respect, Audi has not made a "cast" crank in any I5 for
>the last 30 years, all Audi I5 cranks are forged, esp. the long stroke
>cranks. Not sure where the magazine got its information, but it was
>incorrect.
>
>Revving a stroker motor to 7k rpm is not a problem, most people make way
>too much of the theoretical implications of rod ratio, etc. These motors
>can rev without damage, even in the 95.5mm stroke.
>
>I've driven many stroker motors, even a 95.5 with an 83.5mm bore, I'd
>encourage anyone who has driven a stroker motor with experience that says
>_otherwise_ to speak up.
>
>Javad
>
>
> > Ok, I've read enough thread about the stroker kit to give my 2c worth. I
> > read in a tuner article some time ago that the gas Eurovan uses a cast
> > crank. $300 is a good price for a Cast New 5cyl crank. The
>recommendation
> > was not to overrev the eurovan with rev limiter changes thru chipping
>etc.
> > I'm sure that if you ask them, Eurospec will tell you the same. The
>diesel
> > crank has to be forged, & has to be more expensive.
> > Food For Thought,
> > Bill Gerwig
_________________________________________________________________
STOP MORE SPAM with the new MSN 8 and get 3 months FREE*.
http://join.msn.com/?page=features/junkmail&xAPID=42&PS=47575&PI=7324&DI=7474&SU=
http://www.hotmail.msn.com/cgi-bin/getmsg&HL=1216hotmailtaglines_stopmorespam_3mf
More information about the quattro
mailing list