Torque

[Dave Eaton]

This is a multi-part message in MIME format.
--
[ Picked text/plain from multipart/alternative ]
sorry, i've double checked and the aby factory manual (9/93) references
200nm +180, while the service bulletin (dated 10/93!) for both the aan and
aby, references 150nm +180.  there is no 180nm figure.

so, just 2 numbers, not 3.

to summarise though: "bloody tight" seems about right.

hth,
dave
'95 rs2
'90 ur-q
  -----Original Message-----
  From: ccohen5 [mailto:ccohen5 at compuserve.com]
  Sent: Saturday, 16 February 2002 9:25 a.m.
  To: Dave.Eaton at clear.net.nz; qlist; Kneale Brownson
  Subject: Re: Torque


  There are now 3 numbers out there - most un-German, sounds almost
British!!  150, 180, 200?  Is 180 the acceptable average between the 2 in
the Bentley?

  Colin
    ----- Original Message -----
    From: Kneale Brownson
    To: ccohen5 ; Dave.Eaton at clear.net.nz ; qlist
    Sent: Friday, February 15, 2002 12:34 PM
    Subject: Re: Torque



    Half a rotation of the fastener after reaching 150nm


--