Euro lights into 4KCSQ

[Aaron Sherrick]

Is that how the Blau wiring harness works?  (when you switch to high
beams both the H4 and H1 high beams come on)

Aaron
'86 4kq
www.lehigh.edu/~amsk


-----Original Message-----
From: quattro-admin at audifans.com [mailto:quattro-admin at audifans.com] On
Behalf Of Dupree, Jim
Sent: Wednesday, February 20, 2002 2:03 PM
To: 'Britt Grannis'; Quattro at audifans.com
Subject: RE: Euro lights into 4KCSQ

My plan for my H4/H1 euros (when they arrive) is to add a separate relay
and
switch for the H1 lamps and operate them as Driving lights when I need
them.
Then normally I would only have the high beams of the H4's when I turned
on
my high beams. If I need more light than that I could turn on the H1
driving
lights. I don't think I will want both the H4 high beams and H1 beams
every
time I go up from the low beams. I'll probably wire the relay so the
Driving
lights only operate when the high beams are on so I don't accidentally
leave
them on when I turn off the high beams.

Thanks
Jim

 -----Original Message-----
From: 	Britt Grannis [mailto:hillcountry at caltel.com]
Sent:	Wednesday, February 20, 2002 10:45 AM
To:	Quattro at audifans.com
Subject:	Euro lights into 4KCSQ

I just got my German H4/H1 headlights and am attempting to install them.
I
have the wiring harness for my old H4' with relays already in place.
My question is ( please bear with me I'm really dumb with electronics) I
can
plug (3 prong) in my existing plug into the  large (for lack of a better
description) part of the light but I don't have anything to plug into
the
inner part of the H1 (I think) of the lights. Any BTDT advice or should
I
get out there with my 12 circuit tester and find out what wire activates
the
high beams?
Thanks,
Britt
Hillcountry Water Treatment