Euro lights into 4KCSQ
passat TS
passat_ts at hotmail.com
Wed Feb 20 19:29:01 EST 2002
$150 for $40 worth of parts.
No wonder others claim the Blau is a rip off.
>From: "Aaron Sherrick" <amsk at lehigh.edu>
>To: "'Dupree, Jim'" <dupree at alldata.com>, "'Britt Grannis'"
><hillcountry at caltel.com>, <Quattro at audifans.com>
>Subject: RE: Euro lights into 4KCSQ
>Date: Wed, 20 Feb 2002 14:17:35 -0500
>
>Is that how the Blau wiring harness works? (when you switch to high
>beams both the H4 and H1 high beams come on)
>
>Aaron
>'86 4kq
>www.lehigh.edu/~amsk
>
>
>-----Original Message-----
>From: quattro-admin at audifans.com [mailto:quattro-admin at audifans.com] On
>Behalf Of Dupree, Jim
>Sent: Wednesday, February 20, 2002 2:03 PM
>To: 'Britt Grannis'; Quattro at audifans.com
>Subject: RE: Euro lights into 4KCSQ
>
>My plan for my H4/H1 euros (when they arrive) is to add a separate relay
>and
>switch for the H1 lamps and operate them as Driving lights when I need
>them.
>Then normally I would only have the high beams of the H4's when I turned
>on
>my high beams. If I need more light than that I could turn on the H1
>driving
>lights. I don't think I will want both the H4 high beams and H1 beams
>every
>time I go up from the low beams. I'll probably wire the relay so the
>Driving
>lights only operate when the high beams are on so I don't accidentally
>leave
>them on when I turn off the high beams.
>
>Thanks
>Jim
>
> -----Original Message-----
>From: Britt Grannis [mailto:hillcountry at caltel.com]
>Sent: Wednesday, February 20, 2002 10:45 AM
>To: Quattro at audifans.com
>Subject: Euro lights into 4KCSQ
>
>I just got my German H4/H1 headlights and am attempting to install them.
>I
>have the wiring harness for my old H4' with relays already in place.
>My question is ( please bear with me I'm really dumb with electronics) I
>can
>plug (3 prong) in my existing plug into the large (for lack of a better
>description) part of the light but I don't have anything to plug into
>the
>inner part of the H1 (I think) of the lights. Any BTDT advice or should
>I
>get out there with my 12 circuit tester and find out what wire activates
>the
>high beams?
>Thanks,
>Britt
>Hillcountry Water Treatment
>
_________________________________________________________________
MSN Photos is the easiest way to share and print your photos:
http://photos.msn.com/support/worldwide.aspx
More information about the quattro
mailing list