Rear bench connections

[Steve Kramer]

If you turn on the seat heater in the passenger side front seat, the seat
heats up without sitting on it.  when i turn on the rear heaters the leather
is still cold.  are you saying that there is some contact that a laden seat
makes that an unladen one doesn't ?? I ould swear that I had heat in the
rear before tilting up the bench.


what are the red, yellow and blue connectors attached to the bench.


Steve Kramer

90V8



> From: "Beatty, Robert" <BeattyR at ummhc.org>
> Date: Thu, 28 Feb 2002 12:56:57 -0500
> To: "'Steve Kramer'" <skramer at mac.com>, v8 at audifans.com, quattro at audifans.com
> Subject: RE: Rear bench connections
>
>
> Steve,
>
> You do realize you have to SIT on the rear seats for them to work right?  If
> you knew that, what you could do, if you have a multimeter, is check to make
> sure you have a complete circuit through the heater coils in the seat.
>
> Rob
> 86 5ktq
> 89 200tqa
>
> -----Original Message-----
> From: Steve Kramer [mailto:skramer at mac.com]
>
> Steve Kramer here,
>
> I have tilted up my rear bench and since then the rear heated seats do not
> work.
>
> there are 2 connections I see that connect to the bench  - a large red
> plastic connector and then a blue connector. also there is a yellow
> connector but i don't see anything to connect it.
>
>
> Regards
>
>
> Steve Kramer
>
> 90 V8b
>