Rear bench connections

[Beatty, Robert]

The rear seats on the type 44 have a metal plate that requires someone to be
sitting on them for them to start.  The front passenger seat is controlled
by the switch up front not by weight.  When you have someone in the rear
seat, then the rear seats heat up because the plates are compressed
together.

I'll take a peek at my wagon tonight and email you again tomorrow with some
more details.

Rob
86 5ktq
89 200tqa


-----Original Message-----
From: Steve Kramer [mailto:skramer at mac.com]
Sent: Thursday, February 28, 2002 2:40 PM
To: Beatty, Robert; v8 at audifans.com; quattro at audifans.com
Subject: Re: Rear bench connections


If you turn on the seat heater in the passenger side front seat, the seat
heats up without sitting on it.  when i turn on the rear heaters the leather
is still cold.  are you saying that there is some contact that a laden seat
makes that an unladen one doesn't ?? I ould swear that I had heat in the
rear before tilting up the bench.


what are the red, yellow and blue connectors attached to the bench.


Steve Kramer

90V8



> From: "Beatty, Robert" <BeattyR at ummhc.org>
> Date: Thu, 28 Feb 2002 12:56:57 -0500
> To: "'Steve Kramer'" <skramer at mac.com>, v8 at audifans.com,
quattro at audifans.com
> Subject: RE: Rear bench connections
>
>
> Steve,
>
> You do realize you have to SIT on the rear seats for them to work right?
If
> you knew that, what you could do, if you have a multimeter, is check to
make
> sure you have a complete circuit through the heater coils in the seat.
>
> Rob
> 86 5ktq
> 89 200tqa
>
> -----Original Message-----
> From: Steve Kramer [mailto:skramer at mac.com]
>
> Steve Kramer here,
>
> I have tilted up my rear bench and since then the rear heated seats do not
> work.
>
> there are 2 connections I see that connect to the bench  - a large red
> plastic connector and then a blue connector. also there is a yellow
> connector but i don't see anything to connect it.
>
>
> Regards
>
>
> Steve Kramer
>
> 90 V8b
>