another urq/4ktq intercooler option

[ed armstrong]

Marc,

You got a part number on that intercooler ? I might be
interested in sourcing a new one.


--- Marc Swanson <marcswanson at mediaone.net> wrote:
> After doing some measuring and browsing the
> selection of used diesel truck
> intercoolers on good ol' Ebay I came across one that
> seemed to have almost
> perfect measurements for my available space up in
> front of the engine.  The
> IC came out of a 1995 Isuzu NPR diesel truck with a
> 5.8L engine so it should
> breath pretty well!  The core is about 2.5" thick
> which is fairly thin by IC
> standards (usually 3") but this way I should even be
> able to keep my stock
> grille which is a plus for the sleeper effect.
>
> Anyway, I received the IC today and test fitted it
> to see if it would indeed
> fit.  Quite a tight fit I must admit as it took
> about 10 minutes to angle it
> just right so it would slide into position.  Once I
> had it in place it looked
> like it was meant for the car!  I will probably have
> to trim the inlet as it
> will likely interfere with the turbo cold side (I
> installed the IC without
> the turbo as I have it out at the moment) but that
> shouldn't be a big deal.
>
> pictures at:
>
>
http://www.mswanson.com/phpix/?mode=album&album=4ktq%2Fintercooler
>
>
> -Marc-
> 87 4ktq
> 88 90q


__________________________________________________
Do You Yahoo!?
Send FREE video emails in Yahoo! Mail!
http://promo.yahoo.com/videomail/