4k bilstein shock part numbers?- 90 struts on 4kq

Richard J. Andrews tech at flashmail.com
Wed Jan 16 19:04:55 EST 2002


I used the 90 struts with the 4 bolt rims and purchased 90 front rotors,
The ATE slotted.
this setup works quite well and the rotors are significantly thicker.
i used '88 90 quattro rear struts and 88 90 fwd front struts but they
looked identical to the 90 quattro
fronts, i think i actually used one off the fwd and one off the quattro.
i am not for certain about the 5kt brakes. i stuck with the 90 calipers and
rotors 4 lug, 4x108 bolt pattern.

HTH!
rich
'86 4kq

At 06:50 PM 1/16/2002, you wrote:

>In a message dated 1/16/02 4:19:26 PM, you wrote:
>
><<I'm using 90 fwd 5speed but the quattros and coupe quattros are the same i
>think..
>i used the 4kq tie rods and a arms just new balljoints.
>i would think the 5kt brakes would bolt right up now that i have a larger
>bracket and rotor.>>
>
>dont you need the 20v strut housings to use the 5 bolt 5kt hubs-to use the
>5kt brakes.....or is that what you have.....I checked bearing sizes and there
>are definetly 2 different ones for the audi 90........or are your 4 bolt
>rotors already 276mm??...Mike





More information about the quattro mailing list