Warm start (temporary) fix

[Mark Woodland]

Greetings folks.
Its not really a fix, as I haven't narrowed the problem down any further
than leaking:
A. Injectors
B. Check Valve
C. Something else
In any event, its gotten to the point where its a no-start after 10 minutes.
The temporary work-around is to use the 5KTQs built in output test sequence.
1. Turn ignition on.
2. Bridge fuel pump relay for 4 sec, pull fuse,starts fuel pump.
3. Bridge fuel pump relay for 4 sec, pull fuse,cycles frequency valve.
4. Bridge fuel pump relay for 4 sec, pull fuse,cycles wastegatecontrol.
5. Bridge fuel pump relay for 4 sec, pull fuse,cycles cold start valve for
10 seconds. If its cold.. in the 30s, that should do it.
Turn ignition off, turn back on and start the car... as if by magic.
Wish I'd known that two years ago when it left me sitting...
Mark


_________________________________________________________________
Chat with friends online, try MSN Messenger: http://messenger.msn.com