ABS in 4000Q?

[Huw Powell]

> I seem to remember a while ago someone on this list spoke about installing ABS in a 4000 Quattro.  I don't want to burden readers with a review of what was already discussed, but I can't seem to find this discussion in the archives.  If anyone remembers this discussion, could you help me identify the digest issue numbers where I might read about this?  Or could you put me in contact with the person who undertook this project?
>
> I am considering doing this, and I would appreciate any information that might help me.

You'll basically need the strut housings from an 80Q or 90Q 1988-92 that
had ABS, at least the outer CV joints or hubs, the ABS controller, and
the entire wiring harness including the senders, the control unit under
the back seat, and the realy under the dash.

Then it is just plug and play... except for fashioning some new short
brake lines from the master cylinder to the ABS controller.

--
Huw Powell

http://www.humanspeakers.com/audi/

http://www.humanthoughts.org/