plastic or metal, who has a 1990 100q?

[Dupree, Jim]

I am pretty sure the change also included changes to the hose fittings and
the banjo bolts. So if it is equipped with o-rings you have to use o-rings,
you can't get away with the crush washers. The hose fittings and banjo bolts
should have a grooves to hold the o-rings.

Thanks
Jim

 -----Original Message-----
From: 	Phil Payne [mailto:quattro at isham-research.com]
Sent:	Tuesday, January 29, 2002 11:22 AM
To:	pasquale pilato; quattro at audifans.com
Subject:	Re: plastic or metal, who has a 1990 100q?

> I just took the p/s pump off my car.  I was under the
> impression that the banjo bolts had a metal washer as
> a seal.  They are all rubber o-rings.  I few things I
> would like to know is if this setup is correct, or did
> someone a while back go cheap.  thanks

According to ETKA, they changed at 44-J-220001 in early 1988.

--
  Phil Payne
  http://www.isham-research.com/quattro
  +44 7785 302 803
  +49 173 6242039