[urq] Re: Intercooler question

[JShadzi at aol.com]

It fits in pretty much the stock location, and like I mentioned, one end tank needs to be cut and rotated 90 degrees.  It is a tight fit, but I've seen it in a few instances, and even Gary K's old 4ktq had this done.  The IC's can be had cheaply for under $150, and its a big, good design, though a little thick, but help it fit in that locations.  Stock hoses may need to be modded slightly, but not overly so.  Sorry, no pics, I'll dig around though.
Javad

>How would the 944t IC fit on a 10V urq?  I'm assuming the stock hoses could
>not be used, or at least some of them couldn't be-because isn't the 944 IC
>longer than the urq IC?  Anybody have pics of this upgrade installed?
>
>Brandon
>'84 ur
>
>----- Original Message -----
>From: <JShadzi at aol.com>
>To: <audi90sq at yahoo.com>; "quattro" <quattro at audifans.com>; "urq"
><urq at audifans.com>
>Sent: Wednesday, July 03, 2002 10:46 AM
>Subject: [urq] Re: Intercooler question
>
>
>I'd say stick with the stock unit, the G60 IC is very thick, and thus less
>efficient, I don't think you'd have anything to gain.  The 944t IC, however,
>is a good upgrade, just rotate one of the end tanks 90 degrees and it fits
>very will in an Urq.
>
>Javad
>
>>Does anybody know if a VW Corrado G-60 intercooler
>>would be any better than an UrQ one? I was looking at
>>one the other day and it is much thicker than my UrQ
>>one and looks like it might be made to fit in my UrQ.
>>It measures 7"x8"x5". With my pending k-24 I am
>>thinking I might need more cooling out here in Vegas.
>>
>>Eric Harten
>>
>>
>>=====
>>Eric Harten
>>
>>83' UrQ
>>95' 90SQ
>>01' A4Q
>>
>>__________________________________________________
>>Do You Yahoo!?
>>Sign up for SBC Yahoo! Dial - First Month Free
>>http://sbc.yahoo.com
>>
>_______________________________________________
>Audifans urq mailing list
>Send posts to: mailto:urq at audifans.com
>Manage your list connection: http://www.audifans.com/mailman/listinfo/urq
>
>