CQ strut housings = 80/90 ones?

[auditude at get.net]

Hi Mihnea,

So the theory would be that the 90q20v's share the same strut housings as the CQ's.

Actually, my primary concerns is regarding the offset of the rotor friction surface relative to the wheel
mounting surface.  If those are the same for either axle diameter, that is what I want to know.

Most specifically, would G60 brakes, or RS2/Porsche calipers/adapters bolted onto the G60 mounts, work
with the same rotors in both applications?  Shoot, I remember there being a difference with the CQ rotor, I
thought.  I'll have to go archive-diving, as well as check out the 20v pages, for that.

Thanks,

Ken

On 6 Jul 2002 at 9:22, Mihnea Cotet wrote:

> At 23:55 05/07/02 -0700, auditude at get.net wrote:
> >Hello,
> >
> >Are the strut housings in a Coupe Quattro different from the strut
> >housings in an 80 or 90 series?
> >Assuming the same vintage, 1990-1991.
>
> Ken,
>
>
> AFAIK, the only difference is the shaft's diameter, which is bigger on 20v
> models...
>
> But I could be wrong...
>
>
> Mihnea
>
>