Help needed with sway bar bush P/N for 4kq

Jim Bonnet jimbo at sysdump.com
Sun Jul 7 18:32:02 EDT 2002


I have the same problem with the 84cgt... The bushings you speak of
appear to be NLA? I sure cant find them.. I have a P# of 855 411 327 and
a 22mm bar..

Jim


Jim Haseltine wrote:
> I think you need 857 411 327, although 811 411 327 B is listed for the 80q
> (thought this was the same as the 4k?), Coupe quattro and post 85 Ur-q.
>
> Regards,
>
> Jim Haseltine
>
> ----- Original Message -----
> From: <Jpinkowish at aol.com>
> To: <quattro at audifans.com>
> Sent: Sunday, July 07, 2002 10:21 PM
> Subject: Help needed with sway bar bush P/N for 4kq
>
>
>
>>Hi folks,
>>Went to replace the sway bar bushes that are in the clamps holding the bar
>
> to
>
>>the subframe.  The bushes that came in the Blau kit are not the same as
>
> the
>
>>ones on the car.  The Blau bushes don't have the flat section that goes
>>against the flat mounting surface on the subframe.  Instead of the flat
>>mating surface, these have a curved section that looks to fit into a
>
> recessed
>
>>surface.
>>
>>P/N for the bushes supplied by Blau is 811 411 327B
>>
>>So.......
>>
>>Can someone please:
>>--pass along the proper P/N
>>--tell me the application for the above P/N
>>
>>Please post to the list so that everyone knows.
>>
>>Thanks.
>>
>>Jan Pinkowish
>>'85 4ksq
>>Bristol, CT
>>
>
>
>
>
>



--
quattro... the unfair advantage...





More information about the quattro mailing list