Euro light Questions

[Michael Riebs / Audi V8]

Try to ask Alexander Van Gerbig. He seems to be the Eurolight importer
specialist around here...

Michael L. Riebs
Grand Rapids, Michigan

'90 V8Q
'98 A6QA

www.1stchoicegranite.com

----- Original Message -----
From: "Martin Pajak" <Martin at quattro.ca>
To: <KMracer007 at aol.com>
Cc: <quattro at audifans.com>
Sent: Tuesday, July 16, 2002 12:52 PM
Subject: Euro light Questions


Kenny,

>This is my first question: where to get reflectors?

Germany. You can try places in US but they would probably be way more
expensive than Germany.  I tried to get a replacement lens and was forced to
go over the pond.  Someone in US wanted $90 for a used pitted lens!

>When fit into the car there is about a 3/4 inch gap between the bottom
>of the light at the bumper. this is with the trim pieces installed.

Do you have the proper mounting brackets?  Picture would help (e-mail
privetly).
The lights should slide in and dimentionally there should not be any gap.  3
of 4 bolt to bracket and one straight to the body.

>2: are the trim pieces different between the euro and USA lights.

Exact same.

>Another thing to note , the lights were advertised as coming off
>of a coupe quattro type 85. I assumed since everyone who sells lights
>says they are the same between the coupe and the sedans there
>wouldn't be any problems

Coupe quattro type 85, 90 quattro type 85 and Ur-quattro came with those
H4/H1s.  All interchangable.

Hope this helps.
Martin Pajak
www.quattro.ca