3B conversion again, now pilot bearing woes

[Michael Gough]

You can probably just install the Coupe Quattro pilot bearing into the 3B
crank....I would assume you could anyway.
Mike

> Well, after Javad told me something that made sense, e.g. that my coupe's
> original pilot bearing is a 18x24x16mm and that the 200q20v's pilot bearing
> is a 15x24x26, I've measured the ends of both gearboxes main shafts and
> they measured indeed 18mm and 15mm in diameter...
>
> THIS is something I forgot to worry about before starting the conversion!!
>
> So what could I do in order to have the bigger (18mm) bearing fit into the
> 3B's crank? Should I drill the crank to the appropriate size? Or should I
> try to machine 3mm out of the coupe's main shaft? Could that possibly be
> done with the tranny still in the car? I don't really feel like pulling it
> out too, that's already too much work for my first engine conversion :))))
>
>
> Anyway, thanks for your answers again!
>
>
> Mihnea -still 20vt- and car-less, for how long????? :-)
>