brake calipers and mounting frames/brackets

[passat TS]

[ Converted text/html to text/plain ]

I have a G60 out of my car, and I can measure it this evening.

AAMOF, This G60's were in my CGT, and in order to use them, I had to use a
pair of 80's strut housing, 90q20v rotors, a spacer since the tophat is
different, and longer bolts because of the spacers. Don't forget also, that
the break lines need to be longer than the ones used with the G54's.

I have to say that it works great. I had a hard time to lock the rear, due to
a lot better grip up front.

Carlos.




>From: "Dupree, Jim"
>To: "'qlist' (E-mail)"
>Subject: brake calipers and mounting frames/brackets
>Date: Wed, 31 Jul 2002 11:19:01 -0700
>
>Recently there was a discussion about the G60 calipers and the mounting
>frames or brackets. The conclusion was that the caliper frames have
>different spacing on the mounting bolts. Does anyone know the mounting bolt
>spacing for the G60 caliper frames? Does anyone know the mounting bolt
>spacing for the G54 caliper frames?
>
>Thanks
>Jim Dupree
>1984 4ksq
>1985 4ksq
>

------------------------------------------------------------------------------
Chat with friends online, try MSN Messenger: Click Here[1]

===References:===
  1. http://g.msn.com/1HM1ENUS/c144??PS=47575