Assistance required!

[Brandon Adams]

This is a multi-part message in MIME format.
--
[ Picked text/plain from multipart/alternative ]
OK listers, I need help or I will get violent.
First I'll let you know how things have gone the past couple days. Sunday, =
I finished the MC conversion on my 90q. Well I thought I did. I went to sta=
rt the car and it has a miss. Then my spotter, said that there was oil on t=
he ground. The oil feed line to the turbo had a stripped bolt I mean the bo=
lt stripped the housing. My fault. Monday, I got the hili coil and repaired=
 it. Today, I decided to take the spark plugs out to see if there was too m=
uch paint from the valve job keeping the plugs from getting a ground. So I =
used a mini vac to keep stuff out of the engine as I scraped paint and what=
 not. Well the end of the vac tip fell in! It is about 1/4"X3" long. 2 Hour=
s later, I got good at fishing and waisting time (Idon't have a lot of it).=
 I got it out and proceded. After that it still has a miss but almost wants=
 to run, It stalls though. Sounds as though it's on 3 cyls. not sure. But a=
fter the last try, I have no power at all. I turn the ignition and nothing =
no lights nothing. I came right in after washing up and sat down at the com=
puter. The ignition parts are not new. Almost new, 2 years old. but the car=
 ran great before the swap. The plugs are new though. If any one can point =
me in "a" direction as I'm tapped out at the moment, it would be swell. Tha=
nks, Brandon
--