Heater Blower removal - Type 44

[Brendan]

I've gotten all sorts of good ideas from people...
The main point is that it's stuck in there, NOT screwed...That is what was
confusing the hell out of me....

Going to try again this weekend, and I'll be taking pictures with my
handy-dandy digicam.

Brendan

At 08:06 AM @ 6/10/2002, steinbru at vnet.ibm.com wrote:
>Ref:  Your note of Sun, 09 Jun 2002 20:35:40 -0400
>
>Hi Brendan, I did this last year on my '865ks.  After all the
>frustration it turned out to be "not so bad"  --don't try to
>go in from inside except to pull the under dash shelves and
>glove box so you can disconnect ALL the connections to the
>front of the box.  Then there is adhesive foam tape to get
>loose.  Finally (and I'm leaving out details I'm sure), I used
>a tubafor to lift the box forward and up (fulcrum was another
>laid across the front of the water box).  --Gary