Any local Denver help - blower fan ?

[Kneale Brownson]

--
I'm a long way from Denver, but I got mine loose by using a stiff-bladed
putty knife to help cut the adhesive seal.

Did you see the posting about using a 2 X 4 bridge to "take all the strain
out" of hoisting up the heater core box?  If you go to Chris Miller's
200q20v website  http://members.aol.com/c1j1miller/index.html   put heater
core box in the search window and select the first item that comes up,
there's a long write-up on disconnections necessary to remove the heater
core box.  You don't need to remove the box, just lift it enough to clear
the A/C evaporator box, but if you scroll to the end of the write-up,
you'll see a posting about using a 2X4 lever to make the lifting of the box
easier.

At 11:56 AM 06/16/2002 -0600, Barry McInnes wrote:

>Hi,
>I have followed the blower fan replacement, and I am stuck
>at getting the unit off the firewall.
>If someone has done this before and is local (Boulder/Denver area) and
>can help let me know.
>I would rather pay an Audi group member than try and get a
>mechanic to do this replacement....even if I could.
>I have the blower motor, just need to get the old one out ?
>Barry (3034976231 W, 30354546216H)
>1989 200TQ chipped.
>--
>------
>Barry Mc Innes
>Email: bjm at cdc.noaa.gov
>Phone: 303-4976231 FAX: 303-4977013
>Smail: NOAA/CDC
>        325 Broadway R/CDC1
>        Boulder CO 80305
>------
--