Talking of overfills - Auto tranny
Pantelis Giamarellos
pantg at otenet.gr
Fri Jun 21 22:50:06 EDT 2002
Rob thanks for your kind words.
Have used this method to remove the excess oil I have once put in the RS2's
engine.
Also works great for pentosin removal.
But I must confess that the original idea (at least for me) belongs to input
from the notorious and missed from this list Phil Payne.
Take care and thanks again
Pantelis
----- Original Message -----
From: rob hod <rob3 at hod3.fsnet.co.uk>
To: Pantelis Giamarellos <pantg at otenet.gr>; <quattro at audifans.com>
Sent: Friday, June 21, 2002 10:06 AM
Subject: Re: Talking of overfills - Auto tranny
> Pantelis takes the overall trophy on this one. I went to my local DIY
> store and bought 2metres clear 5mm polytube.
>
> It fitted snugly in the filler tube and I just sucked the tube full
and
> emptied it out a few times. This brought the level down to the correct
mark,
> took 5 mins and cost GBP 1.5.
>
> Thanks Pantelis, 5mm polytube rules!
>
> rob
> ----- Original Message -----
> From: Pantelis Giamarellos <pantg at otenet.gr>
> To: rob hod <rob3 at hod3.fsnet.co.uk>; <quattro at audifans.com>
> Sent: Tuesday, June 18, 2002 7:02 AM
> Subject: Re: Talking of overfills - Auto tranny
>
>
> > Rob Hi,
> >
> > An easy and convenient way is to syphon the excess oil through the
> dipstick
> > hose.
> >
> > You can use a length of water dripping hose as used for irrigating
gardens
> > (5mm diameter) and a large syringe (the ones used for injecting medicine
> to
> > horses) to syphon the oil out.
> >
> > Take care
> > Pantelis
> >
> >
> > ----- Original Message -----
> > From: rob hod <rob3 at hod3.fsnet.co.uk>
> > To: <quattro at audifans.com>
> > Sent: Monday, June 17, 2002 10:42 AM
> > Subject: Talking of overfills - Auto tranny
> >
> >
> > >
> > > Chaps,
> > >
> > > A post I saw on overfills, prompts me to ask this.
> > >
> > > I recently changed the Dexron in my '88 100 Avant (drained and
> removed
> > > the pan) and overfilled slightly.
> > >
> > > The system including convertor is stated as holding 3Litres. I put
> > about
> > > 2.5 Litres. Now with the engine warm and transmission in 'P' the
> dipstick
> > > reads nearly 1/2" too high. The cars done maybe 1000 miles since and
is
> > > behaving fine. Could anyone tell me what (if any ) the dangers are in
> this
> > > situation? I'm quite happy to drain off the excess by loosening the
fill
> > > tube connection at the pan but wondered if theres a better way or
> product
> > to
> > > syphon off the excess if need be?
> > >
> > > Cheers
> > >
> > >
> > >
> > > rob
> > >
> > >
> >
> >
>
>
More information about the quattro
mailing list