Door Lock Actuator Source

[Marc Swanson]

> This will work fine for Mr. Bowles, but for your coupe, and for the 4kq's,
> you still haven't solved the problem that I mentioned before.

> The type 85's did not have an actuator in the driver's door though.
>
> Like I said before, and Marc noted, the piece in the driver's door is
> basically a sender.

Yep, found this out the hard way.  My fix was probably completely different
than what anybody else would do but then again I have a lot of spare parts to
play with...

I used the drivers door actuator from my 1992 80q parts car which is the same
basic design as the 4kq switch except that it has a vacuum nipple on the
bottom.

I had to bend the 90 rod to work in my 4kq door, but after I did that and ran
the vacuum line into the rest of the system.. VOILA, my circuit now works as
intended :-)


Later

-Marc-
87 4ktq (mit remote locks, one touch up/down windows, and lots of other
non-factory goodies)
88 90q