Clutch M&S cylinder 89 200 tq

[Peter Golledge]

rick siev wrote:

> Good day,
> Symptom - clutch eventually (30 min driving city) goes to the floor and does not return.
>
> So Far - Bleed system w/ pressure system - mc, slave, brakes rr, lr, rf, lf. Purchased new clutch mc & slave per bentley & family album. Removed exteraneous dash covering below steering wheel. Will start w/ clutch mc ... slave looks like funn too.
>
> Problem - NOW WHAT there seems to be a couple of ways to go.
>
> I need a btdt to give me some direction, on list or off.

I would probably just replace both and be done with it....  If you
want to try and diagnose:

a.  Check out the seal around the master cylinder for any leaks.  Pretty
hard
    to get to, if you can stick your held on the floor and look up with
a
    small torch you may see a big leak....

b.  Pop out the slave, it is held in by a single bolt and a bit of
corrosion
    usually. :-)  Pull back the seal and check for leaks.

Cheers
--
Peter Golledge