93 12v V6 Head bolt size/type?

[Eric_R_Kissell at email.whirlpool.com]

On 6/25/2002 "Chris Semple" <chris at force5auto.com>  wrote:

>Hi Dave, they're a neat reverse torx kinda setup. E14 size. I'm using a
>SnapOn socket(FLE140A) for them, just make sure it's seated squarely
>before applying force. I rounded one off once, and it took a bagful of
>tricks to get that cyl head off!

I rounded a cylinder bolt head off once too. After evaluating my situation
I decided that since all of the other bolts were loose, the head of the
stripped bolt was the only thing keeping me from removing the cylinder
head. So I drilled the center of the stripped bolt out and removed its
head. The cylinder head then lifted off and the bolt with the rounded head
came out easily with a pair of vise grips. The hardest part of the entire
process was taking care to keep track of all of the metal shavings so I did
not leave any in the head.

Eric Kissell