removing ac on 5KTQ - BTDT anyone?

[Kneale Brownson]

--
That's the evaporator box, Stephane.  There are four screws holding it to
the firewall.  You can get to the screw heads from behind the
glovebox.  You'll probably have to push the glued in insulation aside
slightly.  The screws are just a bit outside the corners of the opening for
the recirculation flap.  When I removed this from my 5ktq, I screwed a
block of pressure treated wood over the opening.  You'll also have to
provide some kind of bracket to hold the air temperature sensor that's in
the top of the evaporator box (under trapezoidal cover).  You need the
sensor connected to have the blower operate.

At 08:33 AM 06/25/2002 -0500, Livolsi, Stephane wrote:

>I've got most of the big stuff out but am having trouble getting the final
>major component out. Hoping someone has BTDT and can offer tips.
>
>The piece I am having trouble with is where the cold air is drawn into the
>blower motor, under the hood, up against the firewall.  It looks like a 2
>piece plastic box with a radiator inside (condensor?evaporator? I don't know
>about these things).  It also has the flapper that switches from fresh to
>recirculated air.
>
>  Anyway, does anyone know where the screws or bolts are that hold this thing
--