Vaccum hose for door locks: Where is it

[Huw Powell]

> I am planning to install a remote control for the door locks in my
> 1984 Audi 100.
>
> Normally, the driver's door is not vacuum operated at all, so I have
> to make some modifications. The bellow is modified and ready to be
> vacuum powered, so all I need is to tap into the hose somewhere, and
> connect to the bellow in the driver's door.
>
> Where do I start searching for a suitable place to tap into the vacuum
> hose so I can route it into the driver's door ?

under the back seat, under the passenger floor carpet, under the
covering in the kick area in front of the passenger door would be good
places.

Pick one where you can do a nice job of running the hose over the
drivers door.

I presume you are adding a pneumatic actuator to the drivers mechanism,
and have some "spare" recycled Audi green plastic hose and connectors
handy?  or there already an actutor there, but with no hose running to
it?  I can never remember.

Anyway, sounds liek a cool project, please report in detail when you're
done!

--
Huw Powell

http://www.humanspeakers.com/

http://www.humanthoughts.org/