Typ. 89 bumper removal?

[Perry, Christoper (EDS)]

What has worked for me is to CAREFULLY push the bottom part of the fitting
on the bumper to the fitting on the fender then give a little nudge to pop
the top in.  No bumper removal necessary.

If you do want to remove the bumper there are two plastic caps on either end
of the bumper in front of the headlights (behind the headlight washers if
you have them). Pry these up and there is an allen head bolt (6 mm I think,
maybe 8mm). Remove these and the bumper slides forward.

HTH,
Chris Perry
89 90q

-----Original Message-----
From: alan pritchard [mailto:alanthecelt at alanthecelt.screaming.net]
Sent: Monday, May 06, 2002 10:23 AM
To: quattro at audifans.com
Subject: Typ. 89 bumper removal?


Hi  guys, how do you do this, its not like on the cgt with 2 big bolts, the
problem is that one side of the plastic bumper has come of its bracket, and
to refit it i believe you have to slide the bumper over it, so how do you
take it off?