200TQ oil cooler fittings

[Jim Green]

I just looked up hydraulics in the yellow pages and
went to the closest hose shop.  Any race store that
sells earls or similar fittings should have them.  Try
http://www.bakerprecision.com/.  That's where I got my
oil cooler, and they have a ton of fittings.
Jim
--- Kent McLean <kentmclean at mindspring.com> wrote:
> Jim Green wrote:
> > > My largest open end wrench (spanner) is 19mm,
> which is way too
> > > small. An adjustable wrench opens to 1 inch,
> which is almost there.
> > > Is the hex fitting 26mm or 27mm?
> >
> >Pipe wrench.
>
> Works for me.
>
> > > And while I'm on the subject, has anyone
> replaced the standard
> > > connectors with AN pieces? I'm looking for the
> metric-to-AN adapter
> > > size, and the AN fittings and hose sizes.
> >
> >18x1.5mm to -10 AN adapters see how I had it at
> >
> >http://www.geocities.com/jeg1976/oil_cooler.html
>
> Thanks, Jim.  It's always nice to know someone's
> been there
> before you.
>
> Where did you get your parts from?
>
> And did I tell you I love this list?
>
> Kent
> '89 200 TQ, "Bad Puppy"
>


__________________________________________________
Do You Yahoo!?
Yahoo! Health - your guide to health and wellness
http://health.yahoo.com