FW: Fram General Questions

[Doug Johnson]

My inquiry of Fram was driven by curiosity, not intent or desire ...

-----Original Message-----
From: Vasquez, Rachel [mailto:Rachel.Vasquez at Honeywell.com] On Behalf Of
PRB Catalog
Sent: Wednesday, May 08, 2002 12:57 PM
To: 'ur-quattro at msn.com'
Subject: RE: Fram General Questions


Doug:

Thanks for the additional information.

According to our data, the PH2870A is the recommended Fram oil filter for
the 1985 Audi 4000 Quattro 1.8 and 2.2L
engines.  The PH2870A contains the anti drain valve feature required for
this application.

The anti drain back valve is located underneath the filter tapping plate.
If you carefully insert a blunt tip, such as
a ball point pen, into the small holes surrounding the large threaded hole
in the center of the tapping plate, you can
feel the anti drain back valve.

Thank you for choosing Fram Filters.

Cordially,

Rachel Vasquez
Catalog/Technical Service Representative
Catalog/Technical Service Department

> -----Original Message-----
> From:	Arcadipane, Janine
> Sent:	Friday, May 03, 2002 1:27 PM
> To:	PRB Catalog
> Subject:	FW: Fram General Questions
>
>
>
> -----Original Message-----
> From:	Doug Johnson [mailto:ur-quattro at msn.com]
> Sent:	Tuesday, April 30, 2002 7:36 AM
> To:	CPGBrandQuestions at honeywell.com
> Subject:	Fram General Questions
>
> Do any of your filter lines have check valves in them to keep oil from
draining to the sump when the engine is not
> running?
>
>  ~ Doug
>