Bad Puppy aptly named

[Marc Swanson]

> If you are going to that effort get an aftermarket cooler
> and AN lines...  You can make up AN lines with fittings/hose
> from NAPA using a vice and large ring spanners.  Oil
> coolers with AN fittings are reasonably cheap.

Yeah, not too bad for the smaller ones that will be roughly the same size as
the OEM one, just a bit more efficient.  I ended up paying about $300 for a
larger cooler with lines and fittings.

http://www.mswanson.com/phpix/?mode=album&album=Audi%2F4ktq%2Foil_cooler

note that the goofy routing is because I was lazy and opted to use the
existing hoses from a previous install in a different location.  It sits a
bit low for my tastes so I'll probably angle it up a bit so it gets better
road clearance.


> > God, I love being an Audi owner. If I didn't have a
> > backup ride, I'd have to give it up.

Just one won't do, you need to work on the other one every now and then ;-)

-Marc-
87 4ktq
88 90q
98 Suzuki Bandit 1200 (for when I think my tq is too slow....)