oxs splice success

[Ron Wainwright]

  Listers,

  After purchasing the 90 200tqa I knew I'd have to do
some work to it which included a full tune up while I
was doing that not knowing when the oxs was last done
I decided to go the cheap way and get the Ford Mustang
ox sensor at the local Autozone cost $35 compared to
the $140 for the correct one
 for those of you that are going to do this thats the
way I'd go
before the ox sensore I was gettin a dismal 16 miles
to the gallon and after doing it I'm gettin 22 miles
to the gallon now a drastic increase and it really
wasn't that hard to get to I just drove the car around
for 15 min or so to get the area hot,
 took the pipe off at the air boot to the turbo for
better accesability at first I got a wrench on it then
I got it off the rest of the way with a oxs socket,
then all I did to splice it was get some male and
female connectors on an audi scale of 1 to 10 it's a
3.
 The part # on the oxs is 13913.
Thanks
Ron
90 200tqa IA stageII,2.0 bar

__________________________________________________
Do You Yahoo!?
LAUNCH - Your Yahoo! Music Experience
http://launch.yahoo.com