rubber fuel inj hose for cis?

[JShadzi at aol.com]

--
[ Picked text/plain from multipart/alternative ]
CIS should never be above 80-90 psi max, so that line should be fine.  Also,
you could get a short piece of Earls type braided hose, that is very tough
stuff too.

Javad

In a message dated 11/6/2002 7:48:41 AM Pacific Standard Time,
scott at dreamtheater.zzn.com writes:

>
> I recently posted about my broken metal fuel pipe on my 200q. I
> managed to fix it, but if it doesn't hold up, I bought a brass
> adapter barb and some Goodyear fuel injection hose to make the
> connection. The hose is rated at 100 psi continuous &500 burst. I
> was wondering if the system pressure of cis is within the lower
> limit. The hose is certified for these pressures and this use, SAE
> 30R9 (?)
>