Torsen differential: Towing

[Kneale Brownson]

Flatbed is best.  All wheels on the ground at low speed for short distances
OK.  Bentley says Front wheels lifted OK, but not rear wheels
lifted.  Again, slow and short.  Slow means 30 mph and short means less
than 30 miles.

At 02:53 PM 11/18/2002 +0000, Alan Pritchard wrote:
>This message is in MIME format. Since your mail reader does not understand
>this format, some or all of this message may not be legible.
>--
>[ Picked text/plain from multipart/alternative ]
>Incidently.... How are you supposed to tow torsen cars????
>-----Original Message-----
>From: Brett Dikeman [mailto:brett at cloud9.net]
>Sent: Sunday, November 17, 2002 9:57 PM
>To: QSHIPQ at aol.com; ssgacc at yahoo.com
>Cc: quattro at audifans.com; torsen at audifans.com
>Subject: Re: Torsen differential
>
>At 6:29 AM -0500 11/16/02, QSHIPQ at aol.com wrote:
>
> >You'd have to define 'bulletproof' better IMO.
>
>No, actually, he really doesn't.  In this case, the concern was
>whether it would present any additional reliability issues over a
>non-torsen equipped vehicle, from an owner's perspective.
>
>The answer, quite clearly, is "no", as long as the vehicle is not
>towed improperly or placed on a two-wheel dyno.
>
>The ONLY, and I repeat ONLY cases of failed torsens which I have
>heard about in 7-8 years, have involved:
>-monkeylads putting vehicles on 2-wheel dynos
>-towing with only two wheels off the ground
>-lack of tranny oil or similar problems(improper oil, too-old oil, etc)
>
> >  I really doubt that a torsen with 150k on it preforms the same as
> >one fresh from the factory.
>
>Yeah.  I hear engines and transmissions don't show wear and perform
>the same at 150k vs. fresh from the factory.  Same thing for
>bearings, bushings, vacuum lines, hoses, electrical motors...
>
>Here's a question.  Have you ever:
>
>-had to replace a customer's torsen diff from wear+tear of daily
>driving?(abuse or neglect does NOT count here.)
>
>-opened up a used torsen diff and inspected it for wear?(no, since
>they're not user serviceable)
>
>-placed a used torsen diff on a test rig to see if it performed up to
>factory spec or not?
>
>Any of the three would represent some sort of evidence.
>
>
> >The problem in racing (audi learned this way back), really appears to be
>with
> >any wheel lift or jumping action, then a sudden shock loading of the device
> >when it gained traction again.  This appears to hold true
> >rally/track/offroad.
>
>The problem in road driving(Audi learned this way back) really
>appears to be that it has ABSOLUTELY NOTHING TO DO WITH RACING.
>
>I'm sure:
>
>-racing vs day to day driving driver behavior
>-racing clutches vs non-racing clutches
>-racing/rallying suspensions with significantly harder suspension mounts
>-wheels lifting and loosing traction vs. wheels staying on pavement
>not doing much at all
>-sport in which handbrake slides(locking the rear wheels but leaving
>fronts spinning, hmm, no, that wouldn't affect a torsen at all) are
>common, versus day to day driving and even track use at qclub events
>where such things would never happen
>
>...has ABSOLUTELY nothing to do with the subject at hand.  But don't
>let any of the above considerations discount the opinion of "Bubba
>The Redneck GM Racer Who Breaks LSDs."
>
>Am I the only one who wonders why you manage to take a very simple
>question, not answer it, but still manage to blow it out into a two
>page rant full of anecdotal, circumstantial evidence that has little
>bearing on the original question at hand?
>
>    I sure which you would apply such energy, enthusiasm, and supposed
>expertise into helping.
>
>Seems like every time I see you post, it's just to nitpick with someone.
>
>Curious that I hear more complaints about you than any other lister...
>
>Brett
>--
>----
>"They that give up essential liberty to obtain temporary
>safety deserve neither liberty nor safety." - Ben Franklin
>http://www.users.cloud9.net/~brett/
>http://www.apple.com/switch/