90Q outer cv on/off

[Alan Pritchard]

This message is in MIME format. Since your mail reader does not understand
this format, some or all of this message may not be legible.
--
[ Picked text/plain from multipart/alternative ]
Glad yours came of easier than mine,  All you do is pop the circlip onto the
groove in the shaft, and tap the joint over the top.. the original circlip
must be about somewhere, if in doubt wash the cv out until you find it, then
regrease.

Best Regards,
Alan Pritchard
Network Administrator



Tel.  01329 289000
Fax. 01329 289001
www.seaeye.com

-----Original Message-----
From: Huw Powell [mailto:human747 at attbi.com]
Sent: Friday, November 29, 2002 1:19 AM
To: quattro at audifans.com
Subject: 90Q outer cv on/off

in order to swap on a used outer cv and boot I have (easier than pulling
the half shaft off my parts car in this cold!), I am operating partly
from memory and partly from Bentley.

Undid boot, used spare axle bolt to pop joint off axle.  Cool.

But does this not mean I have now also removed the circlip from the end
of the axle shaft?  Since it isn't there any more...
How the heck does one replace it upon reassembly??

--
Huw Powell

http://www.humanspeakers.com/

http://www.humanthoughts.org/