90Q outer cv on/off

[Huw Powell]

james accordino wrote:
>
> Don't you just replace it on the end of the shaft and
> then reinstall the "new" joint?  It MUST be in there
> somewhere if it was present originally.  Probably
> still in the old joint.

and

Alan Pritchard wrote:

> Glad yours came of easier than mine,  All you do is pop the circlip onto the
> groove in the shaft, and tap the joint over the top.. the original circlip
> must be about somewhere, if in doubt wash the cv out until you find it, then
> regrease.

Thanks guys, sounds like it ought to work.  I guess I thought the
circlip would be too big to get back out through the CV joint, but of
course it will be *smaller* once it isn't stretched around the axle
stub.  I'll be gettin' greasy later and try it then.

--
Huw Powell

http://www.humanspeakers.com/

http://www.humanthoughts.org/