trying to take 200 gauges apart
scott thomas
scott at dreamtheater.zzn.com
Thu Oct 3 15:03:43 EDT 2002
I tried to take my 200's gauge cluster apart this morning to repair a
faulty ground that's causing the display to act strange when I use a
turn signal with the parking/headlights on. Part of the dash dims
when the indicators light. I have traced the problem to be somewhere
near where the big connector at the 110 mph(2 o'clock) on the speedo
is. When I pull the dash, the problem goes away. Put it back in, it
comes back. Next problem is my bouncy speedo that's getting worse. I
tap hard on the 60 mph area of the face and it usually goes away, but
it hasn't been easy lately...
Anyway, I pulled apart most of it, but I can't get the pc board off
the gauge face half, then next thing, I hope I can fix it!
Also the board looks different from the diagrams I've seen on Blau
and Scott Mo's site...Am I just not seeing the side where the problem
with the bouncy speedo problem comes from?
ANyone BTDT???
The Official Dream Theater Site - http://www.dreamtheater.net/
____________________________________________________________
Get your own Free Web Email Service with POP access at http://www.zzn.com
More information about the quattro
mailing list