etka under win2k

[Ameer Antar]

actually, all you can also just move a file from the NT directory on the CD
to the program directory. You want to move the LEXHDL5.DLL file from the NT
directory on the CD to the 'epc_prog' folder on your hard drive. You will
need to overwrite the old one, which has a different date and size. I think
the problem is the installer installs the program as a Windows 95 install,
but 2000 needs that one file from the NT version install. either way should
work...

-ameer


At 04:50 PM 10/8/2002, quattro-request at audifans.com wrote:

>Date: Tue, 08 Oct 2002 14:24:37 -0400
>To: Alan Pritchard <apritchard at seaeye.com>,
>         "'quattro at audifans.com'" <quattro at audifans.com>
>From: Kneale Brownson <knotnook at traverse.com>
>Subject: Re: etka under win2k
>
>--
>At 07:01 PM 10/08/2002 +0100, Alan Pritchard wrote:
>
> >hi, ive searched the archives and i cant find the info, anyone remember what
> >needs moving to where?
>
>Here's a message I saved some time back regarding this issue:
>
>
>I dont know if this is old news or not, so i will post it anyway. You can
>get the etka software to run by first installing it like yopu normaly would.
>Once installed, locate the etka icon and right click on it.Click on
>properties. click on the compatibilit mode tab. you will then have a choice
>of running the program in win 95 or win98 compatibility mode( i used 98)
>Hope this helps fellow listers out there running windows 2000. Allan
>--
>
>
>--__--__--